Winter Storage
Complete Guide
Protect your investment and ensure trouble-free spring startup
⚠️ Improper storage is the #1 cause of spring startup problems
Follow this guide carefully or book our Winter Service to have us handle everything professionally.
Before Storage
Essential preparation steps
Drain All Fuel
Empty the fuel tank completely and run engine until it stops to clear the carburetor
Why: Old fuel degrades and causes starting problems in spring
Change Oil & Filter
Replace engine oil and filter while warm for better drainage
Why: Used oil contains contaminants that can damage internal components
Clean Thoroughly
Remove all grass clippings, dirt, and debris from deck, engine, and chassis
Why: Trapped moisture causes rust and corrosion during storage
Inspect for Damage
Check belts, cables, blades, and tires for wear or damage
Why: Easier to order parts now than scramble in spring
Disconnect Battery
Remove battery and store in warm, dry place on trickle charger
Why: Prevents discharge and freezing damage
Protect Cylinder
Remove spark plug, spray fogging oil into cylinder, pull cord a few times
Why: Prevents internal rust and ensures easier spring starting
During Storage
- Store indoors in a dry, frost-free location
- Keep away from heat sources and open flames
- Cover with breathable material (not plastic)
- Ensure proper ventilation in storage area
- Keep tires properly inflated
- Store on level ground or blocks
Spring Startup
- Reinstall and charge battery
- Replace spark plug
- Fill with fresh fuel (Aspen recommended)
- Check all fluid levels
- Inspect belts and cables
- Test safety systems
Print This Guide
Keep this checklist in your workshop for easy reference