STRIMMER/BRUSH CUTTER TROUBLESHOOTING
Strimmer & Brush Cutter
Common Problems
DIY diagnostics for strimmer and brush cutter issues
⚠️ SAFETY FIRST
Always wear eye protection and closed-toe shoes
Never work on equipment while engine is running
Disconnect spark plug before any maintenance
Keep bystanders at least 15 meters away
Inspect area for debris before starting
Never use metal cutting blades without proper training
Want this guide for your workshop?
Find Your Problem
Click to expand detailed troubleshooting steps
Flooded Engine? Here's How to Fix It
The most common 2-stroke starting problem
Signs You've Flooded It
- •Strong smell of petrol/fuel
- •Wet or fuel-soaked spark plug
- •No attempt to fire after multiple pulls
- •Sometimes a 'squelchy' sound when pulling
- •Fuel dripping from muffler or carburetor
How to Clear It
- 1Turn choke OFF completely
- 2Hold throttle fully OPEN
- 3Remove spark plug and dry it thoroughly
- 4Pull starter cord several times with plug OUT to vent excess fuel
- 5Reinstall dry plug
- 6Try starting with NO choke and throttle open
💡 Pro Tips to Avoid Flooding
- ✓If it coughs, turn the choke off immediately
- ✓Pull it sharp, not soft - like snapping a whip
- ✓Don't keep pulling 10+ times - that's how you flood it
- ✓Think of it like a car with a flat battery - if it doesn't spin fast enough, it won't start